46 Music Production Tips For 2020

Every music producer wants to have that extra edge to create something extraordinary that will live forever in the hearts and souls of music lovers. This time you will learn about these 46 music production tips for 2020.

Whether you’re experiencing an episode of writer’s block or you want some tips on getting your A-game back, we got you covered.

We have compiled a couple of tips from personal experiences and few from several music production gurus that if followed, will put you ahead of the pack.

1. Never Resample Your Audio Signal With The Side Chain Turned On

Re-sampling is the turning of sound (you may have just created and in most cases with a soft synth and long FX chain) back into an audio sample. Avoid re-sampling your audio signal with the side chain turned on for best results.

2. Learn How to Work Faster

The faster you’re able to work, the more work you’ll be able to do.

3. Avoid Over-Processing

Avoid over-processing of audio with VST Plug-Ins, Over-Compression, And Over-Saturation.
Do your songs that you started with have vibes that seem dull and lifeless? It would be that you’re over-using your plug-in processing and it is something that every mixer should be careful with and here are some few tips to show you how.

  • Record quality tracks by using the appropriate mic
  • Use the solo button conservatively
  • Compress with a light touch

4. Avoid The Over-Clipping while Re-Sampling Audio Signals

Audio clipping is what happens when you push the gain of a signal past the capabilities of the gear handling that signal. Clipping can occur in digital and analog realms alike, but digital clipping does sound different from analog clipping.

The effect of clipping in both cases is distortion, but the nature of the distortion is different depending on the process.

Analog clipping adds complex harmonic distortions that sound different depending on the analog processor. In other words, distorting tape will sound different from distorting tubes, solid-state amplifiers, and so on.

5. Use Free VST Plugins

Don’t be too worried when using Free VST’s. There are many free VST Plugins available in the market you can use to improve your music production experience. Some of them are great and maybe even better than ones for sale.

6. Use Stereo Analyzer From The Start

Imagine you have 50% or your track done, and everything sounds good.

However, when you open your stereo analyzer and you notice that it is not balanced and it is phase jumping from 1 side to another. Use this tool to avoid phasing issues from the beginning. Read more about Stereo Imaging.

7. Be Consistent While Producing

Consistency is Key. Don’t try to implement a couple of different things at the same time. Stick to one style and see how it goes without changing it before its completion. This one is a more general tip than production tip. By doing this, you will see the growth of your fans and being more visible to your potential audience.

8. Use more saturation Plugins for your audio

This process will make your sound fat and bring some warmness and color to your tracks. Not even that, your mix will sound more consistent and professional.

9. Shape your ears while composing music

You should stick to the one source of audio. It would be studio headphones or studio monitors. The idea behind it is that you’ll start hearing things that you have never heard.

10. Mixing in mono is not necessary

You can always use A/B testing to understand how the audio signal sounds before bringing it into mono and removing its natural stereo image.

11. Compare your music with others

Comparing your music with others to gauge your growth isn’t such a bad thing. The critical thing to remember is that you should never copy them, instead strive to be original and create your path and sound that is distinct to your brand.

12. Don’t Add Anything On Master Bus While You Are Mixing

It sounds obvious, but unfortunately, there are a couple of guys still doing it. The downside for doing this is that you would confuse your ears that your sound isn’t good because of mixing, while the culprit is your master bus. Anyway, there are some exceptions like a spectrum analyzer, a stereo analyzer (Free Plugins) and sampler (For example Edison in FL Studio). Try to avoid adding other things that may affect your sound.


13. It Isn’t About The Hardware Gear

In music production, it is not what you have that matters, but what you can do with it.  You can make professional music with software, mouse, keyboard, and pair of headphones. It’s not hardware equipment that makes the difference.

14. Imagine Stereo Field of the Whole Track

The more things you will on the timeline of DAW, the more you will need to adjust the stereo field of each one instrument to being in phase and not out of it. The thing that plays a significant role in phasing is low-end, especially sub-bass and kick. Make sure you are in the safe spot by being “In Phase” because other audio systems may reveal problems with sound.

Stereo Field is Controlled by Stereo Analyser on the Master Buss

15. Make Drums First Even From Drop

It is always a good idea to start with your drum beats. Why is this so?

Well, starting with your drum beats or loops can speed up the process of coming up with the basic structure of your song because drums are the essential elements which will make a structure and create the idea. And now, you can start to add new instruments and sounds. In case you want to be different and unique with your production, then you would possibly begin with any other instruments.

16. Take A Rest With Production

If you notice that you’re losing your creative spirit, that’s an indication that you need to take a break. It is better to take constant breaks than work continuously for too long.

17. Use Transients Processing on Your Drums

Using transient peaks, especially on the kick, snare & clap is a good thing.
Transient brings high amplitude and a short-duration sound at the beginning of a track that improves attack on the drums.

18. Using Opto compression on drums

Opto compression may help you to bring the consistency in a sound, and remove edgy sounds. This type of compression is great for drum room buss but also for the single drums. Here is why:

19. Stack attack on drums

Try to avoid the attack issues, especially on drums. The more precise your attacks will be, the more quality your track will have.


20. Make your tracks available for FREE download

When just starting, you should make your first tracks freely downloadable from the internet. At first, you need to collect your followers, subscribers, and fans. It’s a great way to get attention. There is a website called Theartistunion.com, which is connected to Soundcloud. What it basically does is, that you could ask people for comment, share, or like your tracks in exchange for the free download. Isn’t it great?

21. Make things that others ignore

Stand out from the crowd by doing things that others aren’t doing. Your unique sounds and styles will bring you fans. It’s that simple.

22. You Can Use Samples From Others

It is often said that good artists copy, but the best artists steal.

You can use sample tracks from other artists but always make sure that you change them in a way that they are not identical to the original format.

23. Stop checking tutorials, listen to tracks

A lot of music producers rely too much on the visuals that appear on the screen and settings and ignore what their ears are telling them.

Sometimes it’s better to dim the lights, shut off your monitor and listen to the tracks. It sounds simple, but this trick can help you understand where are your gaps.

24. Recognize what you want

Don’t add too many things to timeline at once, but work on a little piece of sound like a maniac, and this will give you ultimate results).

25. Be inspired by other people’s tracks

You can be inspired by the best, even steal the ideas from them, BUT when, turn the idea on its back and then people will say wtf? Because it shows that you’re super unique.

26. Make Great Headroom For Your Drums

Giving your drums a good headroom for your drums make them louder.

Compression plays a significant role in this part, and you would always need multiband compression in a combination of saturator, passive EQ, and exciter.

Drumroom’s Chain

27. Use the Mute button as often as possible

This will usually happen when new VST effects have been added. Just train your ears with a mute button. And recognize what is missing, and what’s extra.

28. NEVER Resample From one Project Then Open New a One Because Of CPU

You should avoid this because you will lose the chance to make little tweaks that you would do in the source project.

29. Don’t Re-Sample Everything

It’s not good to do re-sampling very often, especially if you want to make tweaks in your source VST Plugin.

30. Don’t Overthink while producing

When you’re composing just compose or when mixing or mastering just mix and master respectively. The critical thing is to concentrate on one thing at a time and not to mix up things. Check this Sulex’s post where he’s explaining how to effectively start, develop and finish drum &  bass track (it also apply for any other genres)

31. Become a Great Producer

Nowadays, there are tons of producers, composers, and artists, with the same signature of sound on of every single track in their production.

If you don’t want to be part of it, make your tracks in a different way that will you stand out amongst them.
Sometimes you would start with the intro, a drop or just play around with the sound and it will create something unique from nothing.

32. You Must Feel Comfortable With Your Environment

You can’t create music if you feel uncomfortable in your environment. Spend time and get to know your environment for it usually takes a bit of time before you get used to the way the musical instruments within the studio harmonize together.

Remember, the more comfortable you’re within your music recording space, the more creative you’ll be.

33. A Good Technique

Modern music production technologies currently available provide anyone with the resources to compose a track. It isn’t so much about your finger skills on the various instruments, but how good you are with the relevant applications.

34. Honest Feedback

So, you think your music is hot because your friends told you?

You need to get someone who tells you the truth about your music and not one who is only interested in telling you what you want to hear.

A lot of people surround themselves with yes men who avoid telling them the truth about their sound so as not to hurt their feelings. Unfortunately, this only leads to contributing to the growth of their sound.

35. Keep an Open Mind

Always keep an open mind when working to find the right fit.

It would be a preset or something that you created yourself. The preset may have sounded like a good idea initially, but later as you moved forward, you realized that those presets were so full of effects that they wouldn’t sit right with your music.

36. Mix It Up With Some Unusual Sound Sources

Have you ever tried playing the Guitar with techno tracks? It’s a lot of fun as it gives out a texture that’s not heard in that style of music.

Spice up your recording by mixing it up with a variety of unusual and unique sounds. Breathing, whispering can produce some unusual sounds. The most crucial element is that you need to be creative and never to stop experimenting with various objects.

37. Occasionally Refer Back To Your First Few Mixes

When you reach version 123 of a track, it may be a good idea to go back to your first few mixes.

This allows you to reconnect with your first intuitive mix and gets you back to your rhythm.

38. Collaboration

Collaborating with people who have different music genres provides you with numerous musical insights across the board.

I have also found out that young people got many fresh ideas and styles which can inspire you to come up with something special.


39. Don’t Sweat the Small Stuff

The ability to know when it isn’t working and to quit is what separates average and excellent music producers. Sometimes you have to let go when it isn’t working.

Sometimes in 2015, I was trying to mix my first ever track and spent a couple of months doing it, three months to be exact. I was trying to synchronize the tracks, balance the drums, but in reality, I was trying to compensate for a track that wasn’t so good.

40. Music Shouldn’t Define Your Genre Labels

Don’t let your music be defined by a genre. It doesn’t have to belong to a specific genre.  While growing up, I was exposed to folk music from my dad, church music from mum, and my older brother had the RnB groove all over him.

I guess my music has been influenced by all these genres, possibly even giving birth to a new genre.

41. Getting Your Melody

Can’t seem to get a melody? Here’s the deal.

One simple and effective way to start and get your melody is to take your drum midi and put it into your melody channel. Once that is done, you’ll be able to get your melody and continue to change the groove as you see fit.

42. Use a Reverb or Convolution Reverb a lot

Using a reverb can push elements towards the back of the soundstage. Do you still want to keep the sound in the front? No problem, just simply increase the amount of pre-delay on the sound as this will detach the sound from its reverb, and retain your elements at the forefront.

43. You Can’t Install Everything

Basically, you don’t need so many plugins to make your music great. All you need is just a few that you will use on a daily basis. That’s not plugins that will result in unique and original production but the production itself.

Just find the ones you like and focus only on the composition of your production. This will also make you the go-to guy in your particular niche.

44.Lay Down Your Musical Elements First

I have found this approach to be extremely useful. Lay down the musical elements of your track before attempting to jot down any baselines. Why?

This is because the musical elements will guide you in getting a baseline direction and ensuring that they all fit together nicely.

45. Save Your Project Often And Consider Backup

During the session in your DAW software, it’s also important to save your project to make sure that everything is right. We often forget to do these actions and then it’s just too late. It’s only one click.

46. Be Yourself

People are boring from these same tunes that sound almost identically. Yes, it’s hard to create and bring something new, unique, but if you figure it out how to do that, make it quality. Then you will go high.


I know we have all been there. You got the idea and even the words in your head, but somehow you can’t seem to put a track on it. Or perhaps, you got this fantastic music production system, but you wish someone would give you some pointers on how to fully optimize your beast.

That was the motivation behind this post. It was my way of reaching out to fellow music producers and sharing tips that have made me who I am today, and I hope that you’ve learned something of value.

Keep making music; keep exploring.

Viliam Šulek

MusicGearo is a blog site created by passionate music producers for the music lover who wants to build a home studio or purchase various music performance or production gear.It also addresses those who already own home studios but need to learn how to get the most out of the gear they already own.

Recent Content